javascript - Redux-Observable: modify state and trigger follow up action - Stack Overflow

admin管理员组

文章数量:1391947

I have the following scenario in redux-observable. I have a ponent which detects which backend to use and should set the backend URL used by the api-client. Both the client and URL are held in the global state object.

The order of execution should be: 1. check backend 2. on error replace backend URL held in state 3. trigger 3 actions to load resources using new backend state URL

What i did so far is, in step 1. access the state$ object from within my epic and modify the backed URL. This seems to only half work. The state is updated by actions triggered in 3. still see the old state and use the wrong backend.

What is the standard way to update state in between actions if you depend on the order of execution?

My API-Epic looks like this:

export const authenticate = (action$, state$) => action$.pipe(
    ofType(actions.API_AUTHENTICATE),
    mergeMap(action =>
        from(state$.value.apiState.apiClient.authenticate(state$.value.apiState.bearer)).pipe(
            map(bearer => apiActions.authenticatedSuccess(bearer))
        )
    )
)

export const authenticatedSuccess = (action$, state$) => action$.pipe(
   ofType(actions.API_AUTHENTICATED_SUCCESS),
    concatMap(action => concat(
        of(resourceActions.doLoadAResource()),
        of(resourceActions.doLoadOtherResource()),
        of(resourceActions.doLoadSomethingElse()))
      )
)

I have the following scenario in redux-observable. I have a ponent which detects which backend to use and should set the backend URL used by the api-client. Both the client and URL are held in the global state object.

The order of execution should be: 1. check backend 2. on error replace backend URL held in state 3. trigger 3 actions to load resources using new backend state URL

What i did so far is, in step 1. access the state$ object from within my epic and modify the backed URL. This seems to only half work. The state is updated by actions triggered in 3. still see the old state and use the wrong backend.

What is the standard way to update state in between actions if you depend on the order of execution?

My API-Epic looks like this:

export const authenticate = (action$, state$) => action$.pipe(
    ofType(actions.API_AUTHENTICATE),
    mergeMap(action =>
        from(state$.value.apiState.apiClient.authenticate(state$.value.apiState.bearer)).pipe(
            map(bearer => apiActions.authenticatedSuccess(bearer))
        )
    )
)

export const authenticatedSuccess = (action$, state$) => action$.pipe(
   ofType(actions.API_AUTHENTICATED_SUCCESS),
    concatMap(action => concat(
        of(resourceActions.doLoadAResource()),
        of(resourceActions.doLoadOtherResource()),
        of(resourceActions.doLoadSomethingElse()))
      )
)

• javascript
• reactjs
• react-redux
• rxjs
• redux-observable

Share Improve this question Follow asked Apr 8, 2019 at 8:30 light_303light_303 2,11133 gold badges1919 silver badges3636 bronze badges 1

• First, what does the authenticate function on your apiClient do and what does it return? Second, it's not clear when the backend URL is updated. Does that happen in a reducer in response to your apiActions.authenticatedSuccess action? Finally, what do the resourceActions.* actions do? Do they kick off other epics? – seniorquico Commented Apr 9, 2019 at 20:40

Add a ment  | 

1 Answer 1

Sorted by: Reset to default 8

A mon approach I've found users discussing on GitHub & StackOverflow is chaining multiple epics, much like what I believe your example tries to demonstrate. The first epic dispatches an action when it's "done". A reducer listens for this action and updates the store's state. A second epic (or many additional epics if you want concurrent operations) listen for this same action and kick off the next sequence of the workflow. The secondary epics run after the reducers and thus see the updated state. From the docs:

Epics run alongside the normal Redux dispatch channel, after the reducers have already received them...

I have found the chaining approach works well to decouple phases of a larger workflow. You may want the decoupling for design reasons (such as separation of concerns), to reuse smaller portions of the larger workflow, or to make smaller units for easier testing. It's an easy approach to implement when your epic is dispatching actions in between the different phases of the larger workflow.

However, keep in mind that state$ is an observable. You can use it to get the current value at any point in time -- including between dispatching different actions inside a single epic. For example, consider the following and assume our store keeps a simple counter:

export const workflow = (action$, state$) => action$.pipe(
  ofType(constants.START),
  withLatestFrom(state$),
  mergeMap(([action, state]) => // "state" is the value when the START action was dispatched
    concat(
      of(actions.increment()),
      state$.pipe(
        first(),
        map(state => // this new "state" is the _incremented_ value!
          actions.decrement()),
      ),
      defer(() => {
        const state = state$.value // this new "state" is now the _decremented_ value!
        return empty()
      }),
    ),
  ),
)

There are lots of ways to get the current state from the observable!

---

Regarding the following line of code in your example:

state$.value.apiState.apiClient.authenticate(state$.value.apiState.bearer)

First, passing an API client around using the state is not a mon/remended pattern. You may want to look at injecting the API client as a dependency to your epics (this makes unit testing much easier!). Second, it's not clear how the API client is getting the current backend URL from the state. Is it possible the API client is using a cached version of the state? If yes, you may want to refactor your authenticate method and pass in the current backend URL.

Here's an example that handles errors and incorporates the above:

/**
 * Let's assume the state looks like the following:
 * state: {
 *   apiState: {
 *     backend: "URL",
 *     bearer: "token"
 * }
 */

// Note how the API client is injected as a dependency
export const authenticate = (action$, state$, { apiClient }) => action$.pipe(
  ofType(actions.API_AUTHENTICATE),
  withLatestFrom(state$),
  mergeMap(([action, state]) =>
    // Try to authenticate against the current backend URL
    from(apiClient.authenticate(state.apiState.backend, state.apiState.bearer)).pipe(
      // On success, dispatch an action to kick off the chained epic(s)
      map(bearer => apiActions.authenticatedSuccess(bearer)),
      // On failure, dispatch two actions:
      //   1) an action that replaces the backend URL in the state
      //   2) an action that restarts _this_ epic using the new/replaced backend URL
      catchError(error$ => of(apiActions.authenticatedFailed(), apiActions.authenticate()),
    ),
  ),
)

export const authenticatedSuccess = (action$, state$) => action$.pipe(
  ofType(actions.API_AUTHENTICATED_SUCCESS),
  ...
)

Additionally, keep in mind when chaining epics that constructs like concat will not wait for the chained epics to "finish". For example:

concat(
  of(resourceActions.doLoadAResource()),
  of(resourceActions.doLoadOtherResource()),
  of(resourceActions.doLoadSomethingElse()))
)

If each of these doLoadXXX actions "starts" an epic, all three will likely run concurrently. Each action will be dispatched one after another, and each epic will "start" running one after another without waiting for the previous one to "finish". This is because epics never really plete. They're long-lived, never ending streams. You will need to explicitly wait on some signal that identifies when doLoadAResource pletes if you want to doLoadOtherResource to run after doLoadAResource.

本文标签： javascriptReduxObservable modify state and trigger follow up actionStack Overflow