admin管理员组文章数量:1332403
The script below isn't working properly. (It just needs jquery and three.js to run). The troublesome lines are these two:
// change the view so looking at the top of the airplane
views[1].camera.position.set( 0,5,0 );
views[1].camera.lookAt(objectManager.airplane.position);
Strangely, if those two lines are mented out, it can be seen that the two similar preceeding lines below do run as expected:
views[1].camera.lookAt(objectManager.airplane.position);
and
view.camera.position.set( 5,0,0 );
For some reason it seems that the call to camera.lookAt only works the first time. After that, the camera no longer follows the airplane object. I'd be extremely grateful if someone can figure out what I'm doing wrong!
The full script is below.
Thanks
$(function(){
var scene, renderer, viewPort, objectManager, views;
init();
animate();
function init() {
viewPort = $('body');
scene = new THREE.Scene();
// construct the two cameras
initialiseViews();
// construct airplane, lights and floor grid
objectManager = new ObjectManager();
objectManager.construct();
objectManager.addToScene(scene);
// make the second camera's position
// stay fixed relative to the airplane
objectManager.airplane.add(views[1].camera);
// make the second camera stay looking
// at the airplane
views[1].camera.lookAt(objectManager.airplane.position);
renderer = new THREE.WebGLRenderer();
renderer.setClearColorHex(0x000000, 1);
renderer.setSize( viewPort.innerWidth(), viewPort.innerHeight() );
viewPort.get(0).appendChild(renderer.domElement);
}
function animate() {
requestAnimationFrame( animate );
render();
}
function render() {
objectManager.tick();
for (var i in views){
views[i].render(scene, renderer);
}
}
function initialiseViews(){
views = [];
// ----------------------------------------------------
// Create the first view, static with respect to ground
// ----------------------------------------------------
views[0] = new View(viewPort, objectManager, scene);
var view = views[0];
view.fov = 40;
view.proportions.height = 0.5;
view.proportions.bottom = 0.5;
view.init();
view.camera.position.y = 1;
view.camera.position.z = 4;
// ----------------------------------------------------
// Create the second view, which follows the airplane
// ----------------------------------------------------
views[1] = new View(viewPort, objectManager, scene);
var view = views[1];
view.fov = 20;
view.proportions.height = 0.5;
view.init();
// set the initial position of the camera
// with respect to the airplane. Views from behind
view.camera.position.set( 5,0,0 );
view.updateCamera = function(){
// change the view so looking at the top of the airplane
views[1].camera.position.set( 0,5,0 );
views[1].camera.lookAt(objectManager.airplane.position);
views[1].camera.updateProjectionMatrix();
};
}
});
function View(viewport, om, scene){
this.scene = scene;
this.camera;
this.objectManager = om;
this.viewPort = viewport;
this.fov = 30;
// default: full width and height
this.proportions = { left: 0, bottom: 0, height: 1, width: 1 };
this.pixels = { left: 0, bottom: 0, height: 0, width: 0, aspect: 0 };
this.aspect;
this.init = function(){
this.pixels.left = Math.floor(this.proportions.left * this.viewPort.innerWidth());
this.pixels.width = Math.floor(this.proportions.width * this.viewPort.innerWidth());
this.pixels.bottom = Math.floor(this.proportions.bottom * this.viewPort.innerHeight());
this.pixels.height = Math.floor(this.proportions.height * this.viewPort.innerHeight());
this.pixels.aspect = this.pixels.width / this.pixels.height;
this.makeCamera();
};
this.makeCamera = function(){
this.camera = new THREE.PerspectiveCamera(
this.fov,
this.pixels.aspect,
0.1, 10000
);
this.camera.updateProjectionMatrix();
this.scene.add(this.camera);
};
this.render = function(scene, renderer){
this.updateCamera();
pixels = this.pixels;
renderer.setViewport(pixels.left, pixels.bottom, pixels.width, pixels.height);
renderer.setScissor(pixels.left, pixels.bottom, pixels.width, pixels.height);
renderer.enableScissorTest(true);
renderer.render( scene, this.camera );
};
this.updateCamera = function(){};
}
function ObjectManager(){
// manages all visible 3d objects (including lights)
this.airplane;
var grid;
var ambientLight;
var pointLight;
this.construct = function(){
this.constructAirplane();
this.constructLights();
this.constructFloorGrid();
};
this.constructAirplane = function(){
this.airplane = new THREE.Object3D();
var fuselage = newCube(
{x: 1, y: 0.1, z: 0.1},
{x: 0, y: 0, z: 0},
[0xffff00, 0x808000, 0x0000ff, 0xff00000, 0xffffff, 0x808080],
[0, 1, 2, 3, 4, 5]
);
this.airplane.add(fuselage);
var tail = newCube(
{x: 0.15, y: 0.2, z: 0.03},
{x: 0.5, y: 0.199, z: 0},
[0xffff00, 0x808000, 0x0000ff, 0xff00000, 0xffffff, 0x808080],
[0, 1, 2, 3, 4, 5]
);
this.airplane.add(tail);
var wings = newCube(
{x: 0.3, y: 0.05, z: 1},
{x: -0.05, y: 0, z: 0},
[0xffff00, 0x808000, 0x0000ff, 0xff00000, 0xffffff, 0x808080],
[0, 1, 2, 3, 4, 5]
);
this.airplane.add(wings);
};
this.constructLights = function(){
ambientLight = new THREE.AmbientLight(0x808080);
pointLight = new THREE.PointLight(0x808080);
pointLight.position = {x: 100, y: 100, z: 100};
};
this.constructFloorGrid = function(){
grid = new THREE.Object3D();
var geometry = new THREE.Geometry();
geometry.vertices.push(new THREE.Vector3( - 200, 0, 0 ) );
geometry.vertices.push(new THREE.Vector3( 200, 0, 0 ) );
linesMaterial = new THREE.LineBasicMaterial( { color: 0x00ff00, opacity: 1, linewidth: .1 } );
for ( var i = 0; i <= 200; i ++ ) {
var line = new THREE.Line( geometry, linesMaterial );
line.position.z = ( i * 2 ) - 200;
grid.add( line );
var line = new THREE.Line( geometry, linesMaterial );
line.position.x = ( i * 2 ) - 200;
line.rotation.y = 90 * Math.PI / 180;
grid.add( line );
}
};
this.addToScene = function(scene){
scene.add( this.airplane );
scene.add( grid );
scene.add( ambientLight );
scene.add( pointLight );
};
this.tick = function(){
this.airplane.rotation.x += 0.005;
this.airplane.rotation.y += 0.01;
this.airplane.position.x -= 0.05;
};
};
function newCube(dims, pos, cols, colAss){
var mesh;
var geometry;
var materials = [];
geometry = new THREE.CubeGeometry( dims.x, dims.y, dims.z );
for (var i in cols){
materials[i] = new THREE.MeshLambertMaterial( { color: cols[i], ambient: cols[i], overdraw: true } );
}
geometry.materials = materials;
for (var i in colAss){
geometry.faces[i].materialIndex = colAss[i];
}
mesh = new THREE.Mesh( geometry, new THREE.MeshFaceMaterial( materials ) );
mesh.position = pos;
return mesh;
}
The script below isn't working properly. (It just needs jquery and three.js to run). The troublesome lines are these two:
// change the view so looking at the top of the airplane
views[1].camera.position.set( 0,5,0 );
views[1].camera.lookAt(objectManager.airplane.position);
Strangely, if those two lines are mented out, it can be seen that the two similar preceeding lines below do run as expected:
views[1].camera.lookAt(objectManager.airplane.position);
and
view.camera.position.set( 5,0,0 );
For some reason it seems that the call to camera.lookAt only works the first time. After that, the camera no longer follows the airplane object. I'd be extremely grateful if someone can figure out what I'm doing wrong!
The full script is below.
Thanks
$(function(){
var scene, renderer, viewPort, objectManager, views;
init();
animate();
function init() {
viewPort = $('body');
scene = new THREE.Scene();
// construct the two cameras
initialiseViews();
// construct airplane, lights and floor grid
objectManager = new ObjectManager();
objectManager.construct();
objectManager.addToScene(scene);
// make the second camera's position
// stay fixed relative to the airplane
objectManager.airplane.add(views[1].camera);
// make the second camera stay looking
// at the airplane
views[1].camera.lookAt(objectManager.airplane.position);
renderer = new THREE.WebGLRenderer();
renderer.setClearColorHex(0x000000, 1);
renderer.setSize( viewPort.innerWidth(), viewPort.innerHeight() );
viewPort.get(0).appendChild(renderer.domElement);
}
function animate() {
requestAnimationFrame( animate );
render();
}
function render() {
objectManager.tick();
for (var i in views){
views[i].render(scene, renderer);
}
}
function initialiseViews(){
views = [];
// ----------------------------------------------------
// Create the first view, static with respect to ground
// ----------------------------------------------------
views[0] = new View(viewPort, objectManager, scene);
var view = views[0];
view.fov = 40;
view.proportions.height = 0.5;
view.proportions.bottom = 0.5;
view.init();
view.camera.position.y = 1;
view.camera.position.z = 4;
// ----------------------------------------------------
// Create the second view, which follows the airplane
// ----------------------------------------------------
views[1] = new View(viewPort, objectManager, scene);
var view = views[1];
view.fov = 20;
view.proportions.height = 0.5;
view.init();
// set the initial position of the camera
// with respect to the airplane. Views from behind
view.camera.position.set( 5,0,0 );
view.updateCamera = function(){
// change the view so looking at the top of the airplane
views[1].camera.position.set( 0,5,0 );
views[1].camera.lookAt(objectManager.airplane.position);
views[1].camera.updateProjectionMatrix();
};
}
});
function View(viewport, om, scene){
this.scene = scene;
this.camera;
this.objectManager = om;
this.viewPort = viewport;
this.fov = 30;
// default: full width and height
this.proportions = { left: 0, bottom: 0, height: 1, width: 1 };
this.pixels = { left: 0, bottom: 0, height: 0, width: 0, aspect: 0 };
this.aspect;
this.init = function(){
this.pixels.left = Math.floor(this.proportions.left * this.viewPort.innerWidth());
this.pixels.width = Math.floor(this.proportions.width * this.viewPort.innerWidth());
this.pixels.bottom = Math.floor(this.proportions.bottom * this.viewPort.innerHeight());
this.pixels.height = Math.floor(this.proportions.height * this.viewPort.innerHeight());
this.pixels.aspect = this.pixels.width / this.pixels.height;
this.makeCamera();
};
this.makeCamera = function(){
this.camera = new THREE.PerspectiveCamera(
this.fov,
this.pixels.aspect,
0.1, 10000
);
this.camera.updateProjectionMatrix();
this.scene.add(this.camera);
};
this.render = function(scene, renderer){
this.updateCamera();
pixels = this.pixels;
renderer.setViewport(pixels.left, pixels.bottom, pixels.width, pixels.height);
renderer.setScissor(pixels.left, pixels.bottom, pixels.width, pixels.height);
renderer.enableScissorTest(true);
renderer.render( scene, this.camera );
};
this.updateCamera = function(){};
}
function ObjectManager(){
// manages all visible 3d objects (including lights)
this.airplane;
var grid;
var ambientLight;
var pointLight;
this.construct = function(){
this.constructAirplane();
this.constructLights();
this.constructFloorGrid();
};
this.constructAirplane = function(){
this.airplane = new THREE.Object3D();
var fuselage = newCube(
{x: 1, y: 0.1, z: 0.1},
{x: 0, y: 0, z: 0},
[0xffff00, 0x808000, 0x0000ff, 0xff00000, 0xffffff, 0x808080],
[0, 1, 2, 3, 4, 5]
);
this.airplane.add(fuselage);
var tail = newCube(
{x: 0.15, y: 0.2, z: 0.03},
{x: 0.5, y: 0.199, z: 0},
[0xffff00, 0x808000, 0x0000ff, 0xff00000, 0xffffff, 0x808080],
[0, 1, 2, 3, 4, 5]
);
this.airplane.add(tail);
var wings = newCube(
{x: 0.3, y: 0.05, z: 1},
{x: -0.05, y: 0, z: 0},
[0xffff00, 0x808000, 0x0000ff, 0xff00000, 0xffffff, 0x808080],
[0, 1, 2, 3, 4, 5]
);
this.airplane.add(wings);
};
this.constructLights = function(){
ambientLight = new THREE.AmbientLight(0x808080);
pointLight = new THREE.PointLight(0x808080);
pointLight.position = {x: 100, y: 100, z: 100};
};
this.constructFloorGrid = function(){
grid = new THREE.Object3D();
var geometry = new THREE.Geometry();
geometry.vertices.push(new THREE.Vector3( - 200, 0, 0 ) );
geometry.vertices.push(new THREE.Vector3( 200, 0, 0 ) );
linesMaterial = new THREE.LineBasicMaterial( { color: 0x00ff00, opacity: 1, linewidth: .1 } );
for ( var i = 0; i <= 200; i ++ ) {
var line = new THREE.Line( geometry, linesMaterial );
line.position.z = ( i * 2 ) - 200;
grid.add( line );
var line = new THREE.Line( geometry, linesMaterial );
line.position.x = ( i * 2 ) - 200;
line.rotation.y = 90 * Math.PI / 180;
grid.add( line );
}
};
this.addToScene = function(scene){
scene.add( this.airplane );
scene.add( grid );
scene.add( ambientLight );
scene.add( pointLight );
};
this.tick = function(){
this.airplane.rotation.x += 0.005;
this.airplane.rotation.y += 0.01;
this.airplane.position.x -= 0.05;
};
};
function newCube(dims, pos, cols, colAss){
var mesh;
var geometry;
var materials = [];
geometry = new THREE.CubeGeometry( dims.x, dims.y, dims.z );
for (var i in cols){
materials[i] = new THREE.MeshLambertMaterial( { color: cols[i], ambient: cols[i], overdraw: true } );
}
geometry.materials = materials;
for (var i in colAss){
geometry.faces[i].materialIndex = colAss[i];
}
mesh = new THREE.Mesh( geometry, new THREE.MeshFaceMaterial( materials ) );
mesh.position = pos;
return mesh;
}
Share
Improve this question
asked Feb 8, 2013 at 12:06
JayyJayy
14.8k27 gold badges107 silver badges167 bronze badges
1 Answer
Reset to default 9 +50You need to do this:
views[1].camera.position.set( 0, 5, 0 );
views[1].camera.lookAt( new THREE.Vector3() );
and not this:
views[1].camera.position.set( 0, 5, 0 );
views[1].camera.lookAt( objectManager.airplane.position );
Your camera is a child of the airplane. It needs to lookAt ( 0, 0, 0 )
in it's local coordinate system -- not the airplane's position
in world space.
Your calls to updateProjectionMatrix()
are not necessary. Copy the three.js examples.
本文标签: javascriptTHREEjs calling lookAt method after rendering does not workStack Overflow
版权声明:本文标题:javascript - THREE.js: calling lookAt method after rendering does not work - Stack Overflow 内容由网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:http://www.betaflare.com/web/1742257917a2441968.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论