华为MA5626-8密码恢复及设置

admin管理员组

文章数量:1122854

设备型号：华为MA5626-8

    #display version
      VERSION : MA5626V800R308C00
      PATCH   : SPC500 SPH505 HP5105
      PRODUCT MA5626

准备工作：超级终端（XP自带、win7下可用secureCRT、Xshell、putty）、tftp、串口连接线、空密码库文件（文末提供下载）

设备的lan1口连接电脑的网口，本地连接设备ip为10.11.104.11，子网掩码为：255.255.255.0，默认网关：10.11.104.2

操作步骤：

1、用串口连接线连接好设备然后打开超级终端连接串口

2、打开设备电源

     Copyright (c) 1998 - 2011 by Huawei Technologies Co.,Ltd.
     All Rights Reserved.
     The last update date of base BIOS B is : Jan  4 2011   09:43:09
     ===============================================================
     BOARD INFORMATION :
       CPU: ARM Integrator - ARM1176JF (ARM).  Processor  running at 533Mhz
       256M bytes DDRAM, 64M bytes flash memory installed on board
       Baudrate of serial channel is 9600bps
       Board's LAN IP address is 10.11.104.2
       Board's LAN Subnet mask is 255.255.255.0
       Board's LAN MAC address is 70:7B:E8:53:BE:D7
     ===============================================================
     System is booting from base BIOS...
     Base BIOS version is 200
     
     Press <D> key to stop auto-boot    0

当出现

Press <D> key to stop auto-boot

时按下D键

    Main menu:
     ==============================================
     0    Boot from flash
     1    Load files
     9    Reboot system
     
     Please enter a choice : 1

选择1

     SubMenu: Load files
     ==============================================
     0    Back to main menu
     1    Download program file to flash
     2    Download Data file to flash
     3    Download basebios file to flash
     4    Download cpld file
     5    Download packet file
     d    Download program file to ddram
     6    Download updatetool file to flash
     7    Download equipment file to flash
     
     Please enter a choice : 2

选择2

    Please select load mode[default: 1 -- TFTP load mode]:
     ============================================
     0  Xmodem load mode
     1  TFTP load mode
     Q  Quit
     
     Please enter your choice:1

选择1

    Board IP address   : [10.11.104.2]
     
     Board mask address : [255.255.255.0]
     
     TFTP server IP     : [10.11.104.1] 10.11.104.11
     
     File name          : [db_sd5103.dat] 5626.dat
     
     You will download file '5626.dat' from TFTP server 10.11.104.11,
     are you sure? (y/n) [y]

在Board IP address和Board mask address行直接回车，在TFTP server IP 输入TFTP服务器地址，在File name输入文件名

 are you sure? (y/n) [y]输入y开始下载，下载完成后返回菜单，选择0然后选择9重启。

重启完成后，使用默认用户密码root、mduadmin就可以登录了。

登录后用#erase flash data

删除全部设备

#reboot system

重启

 

空密码库文件：http://www.liangchan/liangchan/9469.html

 

华为MA5626如何配置成交换机模式

开光口级联:

root

密码mduadmin

(这是默认的用户名和密码)

登陆onu后输入的命令:

enable ---回车

erase flash data ---回车

Y ---回车

reboot system---回车

Y---回车

回车后等待片刻onu重启后以前所配置的数据即可全部删除MA5626>

enable

config

port mode 0/0/1 ge

port mode 0/0/2 ge 指定1,2光口为GE模式。然后把业务口透传到光口,真要命,找好久还搞明白。

vlan service-profile profile-id 1

user-bridging enable 用户桥接使能

commit 加载

quit

vlan 4000 smart 定义业务vlan

定义管理vlan

vlan bind service-profile 4000 profile-id 1 将vlan邦定1号模板

multi-service-port vlan 4000 port 0/1 1-8 user-vlan untagged rx-cttr 6 tx-cttr 6 批量加载业务口

interface vlanif4000 带内管理vlan

ip address 111.111.111.1 255.255.255.0 带内管理ip地址

quit

port vlan 4000 0/0 1 ETH口 vlan1 透传到上行口1

port vlan 4000 0/0 2 ETH口 vlan1 透传到上行口2

 

 

MA5620#config
MA5620(config)#port mode 0/0 ?
---------------------------------------------
  Command of config Mode:
---------------------------------------------
adapt                 Adapt mode
epon                  EPON mode
ge                    GE mode
gpon                  GPON mode

MA5620(config)#display board 0/0

  ---------------------------------------               
  Board Name          : H822EPUB                   
  Board Status        : Active normal                
  ---------------------------------------

  Subboard[0]: H831UP2A                        Status: Normal
  ------------------------------------------------------------------------------
  Port  Port Type        Link State
  ------------------------------------------------------------------------------
     1  AUTO             DOWN 
     2  AUTO             DOWN 
  ------------------------------------------------------------------------------

MA5620(config)#port mode 0/0 ge  
If you want to set the work mode of nni port to fixed type, you need to clear  the configuration of the port or erase the data. Are you sure to proceed? (y/n)[n]:y

MA5620(config)#display board 0/0

  ---------------------------------------               
  Board Name          : H822EPUB                   
  Board Status        : Active normal                
  ---------------------------------------

  Subboard[0]: H831UP2A                        Status: Normal
  ------------------------------------------------------------------------------
  Port  Port  Optic    MDI     Speed      Duplex    Flow-  Active   Link  
        Type  Status           (Mbps)               Ctrl   State          
  ------------------------------------------------------------------------------
     1  GE    absence  -       auto       auto      off    active   offline
     2  GE    normal   -       auto_1000  auto_full off    active   online
  ------------------------------------------------------------------------------
  Note: For a 1000 M, electrical port in the full-duplex mode, setting MDI to 
        any value is invalid

 

本文标签： 华为密码恢复